English
Español
Русский
עברית
Français
Neutral Cure One Component Sealant Silicone Silicone Adhesive Sealant
Product Description
Technical Data
Items | Standard | Results | |||
1 | Density,g/cm³ | specified value ±0.1 | 0.04 | ||
2 | Sag,mm | vertical | ≤3 | 0 | |
level | No deformation | No deformation | |||
3 | Tack free time,h | ≤3 | 0.7 | ||
4 | Extrudability,ml/min | ≥80 | 181 | ||
5 | Elastic recovery rate,% | ≥80 | 82 | ||
6 | Tensile modulus MPa | 23℃
| ≥0.4 and ≥0.6
| 0.7 | |
-20℃
| / | ||||
7 | stretching tensile adhesion | no damaging | no damaging | ||
8 | After ultraviolet radiation
| no damaging | no damaging | ||
9 | After hot and cold pressure tensile adhesion | no damaging | no damaging | ||
10 | After soaking | no damaging | no damaging | ||
11 | Mass loss rate,% | ≤10 | 9 | ||
Product Details
Product Uses
Application:
All kinds of doors and windows installed caulk seal,various indoor decoration caulk seal.
Features:
One-component room temperature curing neutral,easy to use.In the temperature range 4-40℃’s has good extrusion and thixotropy. For most materials have good adhesive properties.Excellent weather resistance and high temperature performance,is the ideal weather sea
Directions:
Must use a solvent such as toluene or acetone,at the interface clean and keep dry.Construction of application of sealant to completely fill the joints to ensure that both sides of bonding.They needs to protect the side labeled tape,but not touch the tape will be the construction surface.The plastic is not cured prior to trimming immediately in order to achieve a beautiful look.
Cautions:
Product quality protection 
