English
Español
Русский
עברית
Français
Basic Info
- Model NO.: FEP O Ring--High Pressure Seal
- Application: Machinery, Industrial Component, Electronic Product, Vehicle, Household Appliance
- Cross-Section Shape: O-Rings
- Trademark: ZG
- Origin: Zhejiang, China
- Material: Encapsulated PTFE
- Effect: Fixture&Sealing
- Storage Life: 10 Years
- Specification: AS568/BS1516/C92
- HS Code: 40169310
Product Description
Encapsulated O RING Basic Info :
1. All raw-material purchased from: DuPont (US) / Dow Corning (Germany) / Bayer (Germany) / KRAIBURG / 3M , products hardness can made from 30Shore A to 95Shore A.
2. Had own mold department more than 20000 size mold , Inner diameter from 0.05mm to 1.2m, C/S from 0.5mm to 20m can be a molding for one time shape, biggest ID can made over 6m , C/S over 30m
3. Encapsulated O Ring supply Silicone and FKM material for inside material .
4.Applied industry: chemical industry, petroleum Industry, medical technique, food industry, sewage-disposal industry, steel industry, and so on.
5. Applied equipment : Mechanical sealing, pressure vessel, gas compressor, reaction vessel, heat exchanger, boiler, filter and so on.
6.Main advantage: First, excellent anti-chemical character. It almost applies to all mediums.
Second, temperature range is very wide. (Around -30° C to200° C)
Third, anti-compressibility function is very good.
Four , Oil proof, Alkali resistance, good elastic and long lifespan
7.Operation conditions: Pressure: <=50MPa
8.In house tool making and free of tooling charge for standard rubber ring, the mold line can be 45° and 180°.
9. Factory authentication by TS16949 and products pass : Wras/ KTW-W270/ Warremark/ LFGB / RoHs / Reach / FDA certificate
![FKM Material O Ring / Encapsulated FEP O Ring]()
![FKM Material O Ring / Encapsulated FEP O Ring]()
![FKM Material O Ring / Encapsulated FEP O Ring]()
1. All raw-material purchased from: DuPont (US) / Dow Corning (Germany) / Bayer (Germany) / KRAIBURG / 3M , products hardness can made from 30Shore A to 95Shore A.
2. Had own mold department more than 20000 size mold , Inner diameter from 0.05mm to 1.2m, C/S from 0.5mm to 20m can be a molding for one time shape, biggest ID can made over 6m , C/S over 30m
3. Encapsulated O Ring supply Silicone and FKM material for inside material .
4.Applied industry: chemical industry, petroleum Industry, medical technique, food industry, sewage-disposal industry, steel industry, and so on.
5. Applied equipment : Mechanical sealing, pressure vessel, gas compressor, reaction vessel, heat exchanger, boiler, filter and so on.
6.Main advantage: First, excellent anti-chemical character. It almost applies to all mediums.
Second, temperature range is very wide. (Around -30° C to200° C)
Third, anti-compressibility function is very good.
Four , Oil proof, Alkali resistance, good elastic and long lifespan
7.Operation conditions: Pressure: <=50MPa
8.In house tool making and free of tooling charge for standard rubber ring, the mold line can be 45° and 180°.
9. Factory authentication by TS16949 and products pass : Wras/ KTW-W270/ Warremark/ LFGB / RoHs / Reach / FDA certificate
Product quality protection 
