English
Español
Русский
עברית
Français
Description
Pleated High Flow Filters are made of advanced polypropylene microfiber, pleated filters are Parker high flow water filters replacement. Pleated high flow filters can directly replace Parker Megaflow and Fulflo series high flow pleated filters for high flow applications water filtration system. The water treatment volume for per pleated high flow filter cartridge equals to 10 pcs standard 40 inch length and 2.5" outer diameter water filter cartridges,inner single O-ring and double O-rings end caps insure no bypass and handle design makes more easier to install and change out.
Feature
1. Good performance with consistent good filtration efficiency and long service life
2. High flow pleated filters are high dirt holding capacity, high flow rates and low pressure drops
3. High flow filter cartridges are wide chemical compatibility for different applications
4. Pleated high flow filters are easier install and replace to Parker Megaflow and Fulflo series high flow filters
5. Per high flow filter equals to 10pcs 40 inch length and 2.5" outer diameter standard filters,save costs and workplace
Application
1. Petrochemical,refineries
2. Food and beverage filtration
3. Power plant water treatment
4. Paints, inks, magnetic media
5. Sea water desalination and RO pre-filtration
6. API,solvents, and water filtration in biopharm market
Specification
| Filter Media | Polypropylene Pleated |
| Length | 20"(508mm), 40"(1016 mm), 60"(1524mm) |
| Outside Diameter | 6 inch(152mm) |
| Filtration Rating | 1μm, 3μm, 5μm, 6μm,10μm, 20μm, 40μm, 70μm, 100μm |
| Support/Drainage | Polypropylene (PP) |
| End Cap Material | Glass fiber reinforced Polypropylene (PP) |
| Seal Material | EPDM, Viton |
| Outside | Netting |
Performance
Operation Data for PF Series Pleated High Flow Filters
| Maximum Operating Temperature | 82℃ |
| Maximum Differential Pressure | 3.4Bar @ 82℃ |
| 2.5Bar @ 20℃ | |
| Suggested Maximum Flow Rate | 20"(508mm) - 30m³/h |
| 40"(1016mm) - 50m³/h | |
| 60"(1524mm) - 70m³/h |
Flow Rate for Length: 40" PF Series Pleated High Flow Filters
Tech Support
Installation Example for PF Series Pleated High Flow Filters
 | ● Pleated high flow filters have stable structure and reliably sealing ● High flow pleated filters are installed in standard high flow filter housings ● Long service life and easy to replace to Parker Megaflow and Fulflo series ● Geometry pleated structure, large filtration area and high dirt holding capacity ● High flow rate & low delta pressure, filters are designed for high filtration efficiency | ||||||||||
Oder Information
| PF | Material | Length | Filtration Rating | Open End Type | O-ring Material |
PF Series Pleated High Flow Filters | P = Polypropylene | 20 = 20"(508mm) | 1 = 1μm | S = Single O-ring | E = EPDM |
| 3 = 3μm | |||||
| 5 = 5μm | |||||
| 40 = 40"(1016mm) | 6 = 6μm | ||||
| 10 = 10μm | D = Double O-rings | V = Viton | |||
| 20 = 20μm | |||||
| 60 = 60"(1524mm) | 40 = 40μm | ||||
| 70 = 70μm | |||||
| 100 = 100μm |
For Example:
PF-P-40-5-D-E
PF Series Pleated High Flow Filters - Polypropylene - 40" (1016mm) - 5μm - Double O-rings - EPDM
Product quality protection 
