Rainfine Chemical Injector for Center Pivot--Rainfine (Dalian) Irrigation Co., Ltd.

Basic Info

Model NO.: NPD200
Usage: Planting and Fertilization
Material: Stainless Steel
Power Source: Electricity
Maximum Injection Rate(L/Hr): 200
Minimum Injection Rate(L/Hr): 20
Working Pressure(Bar): 5-6
Valve Head Material: ABS 1Cr18Ni9Ti 316L
Power(Kw): 0.18
Valtage: 220V Single Phase 380V 3phase 50Hz
Trademark: RAINFINE
Origin: Dalian, China
HS Code: 3101009020

Product Description

Main specification
The capacity up 85 to 500 LPH
The maximum pressure up to 12 bar
Measuring accuracy reaches to +/- 2%
Within the scope of 10% - 100% flow rate
Temperatures of liquid between -10^oc~40^oC
Max.Suct: 2 m
Motor: Standard 220V/380V, 50HZ
Features
Mechanical Actuated Diaphragm
Changeable eccentric drive
Power-off seal, no leakage, with security delivery device, simply maintain
Small size with simple structure
Control
Manual adjustment of the stroke
Stroke actuator
Digital controller
Others
It can be used to transport the goods which is high-viscosity, corrosive or dangerous-Diaphragm rupture detection system

Rainfine Chemical Injector for Center Pivot

Rainfine Chemical Injector for Center Pivot

Injection quills allow chemicals injected into the turbulent flow near the center of the line, providing more uniform dispersion.
The disk type check and seat are located at the tip of the quill to allow constant flushing.
Provide back pressure to insure metering accuracy.
Prevent back flow.
Prevent bleed through when water pressure is low or line is drained.
Prevent siphoning when metering pumps
The chemicals can be sprayed properly with quills

Rainfine Chemical Injector for Center Pivot

The scale on the tank makes it more convenient and quicker for the user to apply chemicals. After applying according to the ratio, the mixer starts to work on them at the desired value and gain the best concentration.
The tank made from HDPE is highly corrosion-resistant, tough, reliable and strong.
The tank body is elaborately designed and seamless. The inlet is appropriate in size, tightly sealed and effectively prevents accidents resulting in children and livestock.

Technical data
Model	Flow(L/h)	Pressure(Mpa)	Pump Speed (SPM)	Stroke Motor (mm)	Diagragm Effective Diameter (mm)	Worm Gear Speed Ratio	Electric Motor Chosen	Diameter of inlet & Outlet Pump Pipes (mm)
JXMA-A 85/1.0	85	0.7	72	6	70	20:1	3-50HZ 220/380V IP55/F	DN15 DN25
JXMA-A 120/0.7	120		72	8		20:1
JXMA-A 170/0.7	170		144	6		10:1
JXMA-A 240/0.7	240		144	8
JXMA-A 315/0.5	315	0.5	144	8	80
JXMA-A 400/0.5	400		144	10
JXMA-A 500/0.5	500		180	10		8:1(m2.5,24:3)

Product Categories

Manufacturer Video

Contact Us

Hot Product