The main structure of the series dryer is basically the same, mainly divided into upper cover, box, air intakeMouth, observation window and temperature hole, etc.The wet air in the fluidized chamber between the upper cover and the fluidized bed plate is drawn out by the air orifice and the temperature measuring hole is used to detect the temperature in the fluidized chamber.The operation of materials can be monitored by the observation window.The box body is an inflatable chamber, hot and cold air from the air inlet into the formation of a certain pressure, so as to make the distribution of gas through the fluidized bed uniform, where the air temperature can be measured by temperature sensor (generally not).Materials that fall into the box due to abnormal operation can be discharged and removed.2. How it worksDriven by a vibration motor, the machine makes periodic vibration along a certain direction at a certain fixed frequency.The treated material forms fluidized form under the joint action of exciting force and medium, so that the material particles can fully contact with the medium, complete the heat and mass transfer process, and achieve the purpose of drying.