Product Description

Waste plastic pyrolysis equipment

Plastic products are widely used, everywhere plastic waste. There is a serious impact on our environment from both visual pollution and potential hazards. Visual pollution means the aesthetic perception of a living city that is affected by waste plastic everywhere. Potential hazards mainly refers to waste plastics resistant to degradation, affecting crop nutrient and water absorption, reduce production; otherwise, animals will be unconscious death. The recycling of waste plastics has increasingly become an important part of environmental protection. DoingGroup has developed a waste plastic pyrolysis equipment in addition to plastic waste. The device can also handle waste solid waste organic waste such as waste tires / waste rubber / waste acrylic / garbage / medical waste / oil shale, the operation of the device is as follows:

Waste plastic pyrolysis equipment working process

1. The waste plastics and other organic solid waste by the conveyor belt to the bunker by the automatic feeding system to the cracking furnace, rotating the main furnace can control the positive and negative reversing switch control switch to adjust the organic raw materials in the main furnace of the material distribution, the total amount of material control in the total volume below two thirds, close the feed sealing door, and then open the heating system.

2. When the temperature reaches about 150 ℃, gas will be generated (most of the gas is the exhaust gas at this time). When the temperature reaches about 220 ℃, oil and gas will start to enter the multi-function separator. After the multi-function separator, there will be some oil separation down, the pipeline into the residual tank, the pump into the cracking furnace to continue heating cracking.

3. Oil and gas into the cooling system through the multi-function separator, the condensed oil and water flows into the oil-water separator through the pipe for oil-water separation measurement. Under the action of negative pressure, the non-condensable gas enters the micro-vacuum system through the cooling system piping and is filtered again.

4. The pyrolyzed flue gas enters the powerful atomization dedusting tower through the flue pipe to spray dust and cool down, and is discharged into the industrial exhaust gas purifier by the induced draft fan, finally reaching innocuous discharge.

The waste plastic pyrolysis equipment is not only able to degrade the plastic waste in life, reduce environmental pollution, but also produce more renewable energy to ease the energy crisis, more and more because of its own advantages as follows:

1. Reactor is made according to the standard of pressure production, using 16mm thick boiler special steel and arc compression head, can withstand high pressure and high temperature.

2.  High-standard 3-step welding process, not easy to crack, long service life.

3.  Pinion rotation device, power is small, not directly contact the reactor, less heat transfer, not easy to deformation.

4. The three-stage cooling system uses tube condensation, also known as a heat exchanger, and is currently the most commonly used and best performing condenser in the oil industry. Can ensure that the cracked oil and gas fully cooled, high oil yield.

5. Safety device oil-water separator, water seal, vacuum device, to ensure safe and efficient operation of equipment.

After the reactor cracking will produce lysis oil, carbon black, combustible gas.

Fuel oil application

Fuel Oil: Steel Plant, Boiler Heating, Heavy Oil Generator, Cement Plant.

Carbon black application

Carbon black: pressure ball burning, refining flour. Which refined flour and can be used for new tires, rubber, plastic, paint manufacturing.

Combustible gas: It is recycled by the equipment for combustion heating of the reactor.

Waste plastics and other waste is the simplest way to deal with landfill and simple incineration. Landfills need a lot of valuable land resources. Since the development of waste rubber, waste plastics, fuel oil pyrolysis equipment has become a common research and attention of all levels of government issues. It not only saved valuable land resources for human beings, but also created a new topic of new energy. The waste plastic pyrolysis equipment investment occupies 450 square meters of production space, plant simple, rich source of raw materials, low cost, large profit margins, the recovery of fuel oil is widely used. Running one day there will be tens of thousands of dollars of revenue. Domestic customers can recover all the investment within three months, Southeast Asia investment customers a month and a half to recover all the investment.

Company Information

Doing is better than thousands of ideas.

Company’s concept

Your success is our best wishes.

Company’s aim

Henan  DOING Renewable Energy Equipment Co. ,ltd is a leading manufacturer specialized in waste tire /plastic/rubber recycling machine, waste tire & rubber pyrolysis plant, waste tire/plastic/rubber crude oil distillation plant and bio-diesel plant ranging from Research & Development, Design, Manufacturing to Installation & Commissioning. It is one of the 4 members to make up DOING GROUP and others are Henan DOING Mechanical Equipment Co.,ltd, Henan DOING Oil & Fat Engineering Technology Co. ,ltd and Xinxiang Leesyn Mechanical Equipment Installation Co. ,ltd.

Our products include:

8T/D waste tire & rubber pyrolysis plant, waste plastic to oil machine

10T/D waste tire & rubber pyrolysis plant, waste plastic to oil machine

5T/D waste tire oil/plastic oil/rubber oil / engine oil distillation plant

10T/D waste tire oil/plastic oil/rubber oil / engine oil distillation plant

20T/D waste tire oil/plastic oil/rubber oil / engine oil distillation plant

30T/D waste tire oil/plastic oil/rubber oil / engine oil distillation plant

DOING GROUP focus on the international market, and products are 100% exported. We have an international trade team with 30 members, 5 senior process engineers, 7 senior mechanical design engineers and 100 workers for production. Our products have been exported to more than 20 countries and regions such as Italy, Macedonia, Turkey, Iran, Egypt, Mexico, Ecuador, Haiti, Congo, Uganda, Nigeria, India, Pakistan, Thailand, Malaysia, Bangladesh etc.

With factory area more than 20000㎡and equipped with digital control cutting machine, auto-welding machine, large rolling machine, p&c lab for quality control and X-ray detection room etc, DOING GROUP is capable of modern production.

The headquarters of DOING GROUP is located in Zhengzhou the capital city of Henan province, where it takes 30 minutes’ driving from the Xinzheng International Airport(CGO) and only 20minutes’ driving from east high-speed railway station, and the transportation is very convenient. Also we specially prepare cars for customers’ pick up.

DOING GROUP welcome your visit!

Our Services

Delivery time will be 30 days after receive deposit from customer. It needs 7 days before shipping date to prepare loading and Custom works.

Shipping will need 3-4 pieces 40HQ to deliver a 20 tons and 30 tons continuous pyrolysis plant.

Batch type pyrolysis plant need a 40FR and a 40HQ.

2. Land area and foundation

Pyrolysis plant requires a 30m * 15m of land area; this is only for machines, customer need to prepare more land to store raw materials and oil tank. Distillation machine required land area is 10m * 15m, another 20 square meters land space install a boiler room.

3. Machine installation

Our company will send one technician for each set of pyrolysis plant for guiding your installation, testing the machine and training your workers. The installation period will be 30 days more or less, engineer salary $80 per day. And buyer should take charge of technicians’ round trip air tickets and accommodation during installation.

4. After-sale Service       

Warranty of pyrolysis plant and distillation machine is one year. During the year, if any quality problem, we will be free of maintenance and replacement parts. Man-made damage is not included.

Contact: Ms Bonnie

Phone: +86-371-5677 1821

Mobile/Wechat/Whatsapp:0086-135-2669-2320

Skype: bonniezhao2

Email: oilmachine@doinggroup.com

http://www.recyclingpyrolysisplant.com

http://www.doinggroup.com